Struct slotmap::sparse_secondary::SparseSecondaryMap

pub struct SparseSecondaryMap<K: Key, V, S: BuildHasher = RandomState> { /* fields omitted */ }

Sparse secondary map, associate data with previously stored elements in a slot map.

A SparseSecondaryMap allows you to efficiently store additional information for each element in a slot map. You can have multiple secondary maps per slot map, but not multiple slot maps per secondary map. It is safe but unspecified behavior if you use keys from multiple different slot maps in the same SparseSecondaryMap.

A SparseSecondaryMap does not leak memory even if you never remove elements. In return, when you remove a key from the primary slot map, after any insert the space associated with the removed element may be reclaimed. Don’t expect the values associated with a removed key to stick around after an insertion has happened!

Unlike a SlotMap, a SparseSecondaryMaps elements do not need to be Slottable. This means that if you can’t or don’t want to use nightly Rust, and your data is not Slottable, you can store that data as secondary data.

Unlike SecondaryMap, the SparseSecondaryMap is backed by a HashMap. This means its access times are higher, but it uses less memory and iterates faster if there are only a few elements of the slot map in the secondary map. If most or all of the elements in a slot map are also found in the secondary map, use a SecondaryMap instead.

Example usage:

// Nightly Rust needed to store String which is not Copy.
let mut players: SlotMap<_, &'static str> = SlotMap::new();
// But not for secondary maps.
let mut nicks: SparseSecondaryMap<_, String> = SparseSecondaryMap::new();
let mut health = SparseSecondaryMap::new();
let mut ammo = SparseSecondaryMap::new();

let alice = players.insert("alice");
nicks.insert(alice, "the_dragon1".to_string());
let bob = players.insert("bob");
nicks.insert(bob, "bobby_".to_string());

for p in players.keys() {
    health.insert(p, 100);
    ammo.insert(p, 30);
}

// Alice attacks Bob with all her ammo!
health[bob] -= ammo[alice] * 3;
ammo[alice] = 0;

Implementations

impl<K: Key, V> SparseSecondaryMap<K, V, RandomState>

pub fn new() -> Self

Constructs a new, empty SparseSecondaryMap.

Examples

let mut sec: SparseSecondaryMap<DefaultKey, i32> = SparseSecondaryMap::new();

pub fn with_capacity(capacity: usize) -> Self

Creates an empty SparseSecondaryMap with the given capacity of slots.

The secondary map will not reallocate until it holds at least capacity slots.

Examples

let mut sm: SlotMap<_, i32> = SlotMap::with_capacity(10);
let mut sec: SparseSecondaryMap<DefaultKey, i32> =
    SparseSecondaryMap::with_capacity(sm.capacity());

impl<K: Key, V, S: BuildHasher> SparseSecondaryMap<K, V, S>

pub fn with_hasher(hash_builder: S) -> Self

Creates an empty SparseSecondaryMap which will use the given hash builder to hash keys.

The secondary map will not reallocate until it holds at least capacity slots.

Examples

let mut sm: SlotMap<_, i32> = SlotMap::with_capacity(10);
let mut sec: SparseSecondaryMap<DefaultKey, i32, _> =
    SparseSecondaryMap::with_hasher(RandomState::new());

pub fn with_capacity_and_hasher(capacity: usize, hash_builder: S) -> Self

Creates an empty SparseSecondaryMap with the given capacity of slots, using hash_builder to hash the keys.

The secondary map will not reallocate until it holds at least capacity slots.

Examples

let mut sm: SlotMap<_, i32> = SlotMap::with_capacity(10);
let mut sec: SparseSecondaryMap<DefaultKey, i32, _> =
    SparseSecondaryMap::with_capacity_and_hasher(10, RandomState::new());

pub fn len(&self) -> usize

Returns the number of elements in the secondary map.

Examples

let mut sm = SlotMap::new();
let k = sm.insert(4);
let mut squared = SparseSecondaryMap::new();
assert_eq!(squared.len(), 0);
squared.insert(k, 16);
assert_eq!(squared.len(), 1);

pub fn is_empty(&self) -> bool

Returns if the secondary map is empty.

Examples

let mut sec: SparseSecondaryMap<DefaultKey, i32> = SparseSecondaryMap::new();
assert!(sec.is_empty());

pub fn capacity(&self) -> usize

Returns the number of elements the SparseSecondaryMap can hold without reallocating.

Examples

let mut sec: SparseSecondaryMap<DefaultKey, i32> = SparseSecondaryMap::with_capacity(10);
assert!(sec.capacity() >= 10);

pub fn reserve(&mut self, additional: usize)

Reserves capacity for at least additional more slots in the SparseSecondaryMap. The collection may reserve more space to avoid frequent reallocations.

Panics

Panics if the new allocation size overflows usize.

Examples

let mut sec: SparseSecondaryMap<DefaultKey, i32> = SparseSecondaryMap::new();
sec.reserve(10);
assert!(sec.capacity() >= 10);

pub fn contains_key(&self, key: K) -> bool

Returns true if the secondary map contains key.

Examples

let mut sm = SlotMap::new();
let k = sm.insert(4);
let mut squared = SparseSecondaryMap::new();
assert!(!squared.contains_key(k));
squared.insert(k, 16);
assert!(squared.contains_key(k));

pub fn insert(&mut self, key: K, value: V) -> Option<V>

Inserts a value into the secondary map at the given key. Can silently fail if key was removed from the originating slot map.

Returns None if this key was not present in the map, the old value otherwise.

Examples

let mut sm = SlotMap::new();
let k = sm.insert(4);
let mut squared = SparseSecondaryMap::new();
assert_eq!(squared.insert(k, 0), None);
assert_eq!(squared.insert(k, 4), Some(0));
// You don't have to use insert if the key is already in the secondary map.
squared[k] *= squared[k];
assert_eq!(squared[k], 16);

pub fn remove(&mut self, key: K) -> Option<V>

Removes a key from the secondary map, returning the value at the key if the key was not previously removed. If key was removed from the originating slot map, its corresponding entry in the secondary map may or may not already be removed.

Examples

let mut sm = SlotMap::new();
let mut squared = SparseSecondaryMap::new();
let k = sm.insert(4);
squared.insert(k, 16);
squared.remove(k);
assert!(!squared.contains_key(k));

// It's not necessary to remove keys deleted from the primary slot map, they
// get deleted automatically when their slots are reused on a subsequent insert.
squared.insert(k, 16);
sm.remove(k); // Remove k from the slot map, making an empty slot.
let new_k = sm.insert(2); // Since sm only has one empty slot, this reuses it.
assert!(!squared.contains_key(new_k)); // Space reuse does not mean equal keys.
assert!(squared.contains_key(k)); // Slot has not been reused in squared yet.
squared.insert(new_k, 4);
assert!(!squared.contains_key(k)); // Old key is no longer available.

pub fn retain<F>(&mut self, f: F) where
    F: FnMut(K, &mut V) -> bool, 

Retains only the elements specified by the predicate.

In other words, remove all key-value pairs (k, v) such that f(k, &mut v) returns false. This method invalidates any removed keys.

Examples

let mut sm = SlotMap::new();
let mut sec = SparseSecondaryMap::new();

let k1 = sm.insert(0); sec.insert(k1, 10);
let k2 = sm.insert(1); sec.insert(k2, 11);
let k3 = sm.insert(2); sec.insert(k3, 12);

sec.retain(|key, val| key == k1 || *val == 11);

assert!(sec.contains_key(k1));
assert!(sec.contains_key(k2));
assert!(!sec.contains_key(k3));

assert_eq!(2, sec.len());

pub fn clear(&mut self)

Clears the secondary map. Keeps the allocated memory for reuse.

Examples

let mut sm = SlotMap::new();
let mut sec = SparseSecondaryMap::new();
for i in 0..10 {
    sec.insert(sm.insert(i), i);
}
assert_eq!(sec.len(), 10);
sec.clear();
assert_eq!(sec.len(), 0);

pub fn drain(&mut self) -> Drain<'_, K, V>

Clears the slot map, returning all key-value pairs in arbitrary order as an iterator. Keeps the allocated memory for reuse.

Examples

let mut sm = SlotMap::new();
let k = sm.insert(0);
let mut sec = SparseSecondaryMap::new();
sec.insert(k, 1);
let v: Vec<_> = sec.drain().collect();
assert_eq!(sec.len(), 0);
assert_eq!(v, vec![(k, 1)]);

pub fn get(&self, key: K) -> Option<&V>

Returns a reference to the value corresponding to the key.

Examples

let mut sm = SlotMap::new();
let key = sm.insert("foo");
let mut sec = SparseSecondaryMap::new();
sec.insert(key, "bar");
assert_eq!(sec.get(key), Some(&"bar"));
sec.remove(key);
assert_eq!(sec.get(key), None);

pub fn get_mut(&mut self, key: K) -> Option<&mut V>

Returns a mutable reference to the value corresponding to the key.

Examples

let mut sm = SlotMap::new();
let key = sm.insert("test");
let mut sec = SparseSecondaryMap::new();
sec.insert(key, 3.5);
if let Some(x) = sec.get_mut(key) {
    *x += 3.0;
}
assert_eq!(sec[key], 6.5);

pub fn iter(&self) -> Iter<'_, K, V>

An iterator visiting all key-value pairs in arbitrary order. The iterator element type is (K, &'a V).

This function must iterate over all slots, empty or not. In the face of many deleted elements it can be inefficient.

Examples

let mut sm = SlotMap::new();
let mut sec = SparseSecondaryMap::new();
let k0 = sm.insert(0); sec.insert(k0, 10);
let k1 = sm.insert(1); sec.insert(k1, 11);
let k2 = sm.insert(2); sec.insert(k2, 12);

for (k, v) in sec.iter() {
    println!("key: {:?}, val: {}", k, v);
}

pub fn iter_mut(&mut self) -> IterMut<'_, K, V>

An iterator visiting all key-value pairs in arbitrary order, with mutable references to the values. The iterator element type is (K, &'a mut V).

This function must iterate over all slots, empty or not. In the face of many deleted elements it can be inefficient.

Examples

let mut sm = SlotMap::new();
let mut sec = SparseSecondaryMap::new();
let k0 = sm.insert(1); sec.insert(k0, 10);
let k1 = sm.insert(2); sec.insert(k1, 20);
let k2 = sm.insert(3); sec.insert(k2, 30);

for (k, v) in sec.iter_mut() {
    if k != k1 {
        *v *= -1;
    }
}

assert_eq!(sec[k0], -10);
assert_eq!(sec[k1], 20);
assert_eq!(sec[k2], -30);

pub fn keys(&self) -> Keys<'_, K, V>

An iterator visiting all keys in arbitrary order. The iterator element type is K.

This function must iterate over all slots, empty or not. In the face of many deleted elements it can be inefficient.

Examples

let mut sm = SlotMap::new();
let mut sec = SparseSecondaryMap::new();
let k0 = sm.insert(1); sec.insert(k0, 10);
let k1 = sm.insert(2); sec.insert(k1, 20);
let k2 = sm.insert(3); sec.insert(k2, 30);
let keys: HashSet<_> = sec.keys().collect();
let check: HashSet<_> = vec![k0, k1, k2].into_iter().collect();
assert_eq!(keys, check);

pub fn values(&self) -> Values<'_, K, V>

An iterator visiting all values in arbitrary order. The iterator element type is &'a V.

This function must iterate over all slots, empty or not. In the face of many deleted elements it can be inefficient.

Examples

let mut sm = SlotMap::new();
let mut sec = SparseSecondaryMap::new();
let k0 = sm.insert(1); sec.insert(k0, 10);
let k1 = sm.insert(2); sec.insert(k1, 20);
let k2 = sm.insert(3); sec.insert(k2, 30);
let values: HashSet<_> = sec.values().collect();
let check: HashSet<_> = vec![&10, &20, &30].into_iter().collect();
assert_eq!(values, check);

pub fn values_mut(&mut self) -> ValuesMut<'_, K, V>

An iterator visiting all values mutably in arbitrary order. The iterator element type is &'a mut V.

This function must iterate over all slots, empty or not. In the face of many deleted elements it can be inefficient.

Examples

let mut sm = SlotMap::new();
let mut sec = SparseSecondaryMap::new();
sec.insert(sm.insert(1), 10);
sec.insert(sm.insert(2), 20);
sec.insert(sm.insert(3), 30);
sec.values_mut().for_each(|n| { *n *= 3 });
let values: HashSet<_> = sec.into_iter().map(|(_k, v)| v).collect();
let check: HashSet<_> = vec![30, 60, 90].into_iter().collect();
assert_eq!(values, check);

Trait Implementations

impl<K: Clone + Key, V: Clone, S: Clone + BuildHasher> Clone for SparseSecondaryMap<K, V, S>

fn clone(&self) -> SparseSecondaryMap<K, V, S>

Returns a copy of the value.

pub fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<K: Debug + Key, V: Debug, S: Debug + BuildHasher> Debug for SparseSecondaryMap<K, V, S>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<K, V, S> Default for SparseSecondaryMap<K, V, S> where
    K: Key,
    S: BuildHasher + Default, 

fn default() -> Self

Returns the “default value” for a type.

impl<'a, K, V, S> Extend<(K, &'a V)> for SparseSecondaryMap<K, V, S> where
    K: Key,
    V: 'a + Copy,
    S: BuildHasher, 

fn extend<I: IntoIterator<Item = (K, &'a V)>>(&mut self, iter: I)

Extends a collection with the contents of an iterator.

pub fn extend_one(&mut self, item: A)

🔬 This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

pub fn extend_reserve(&mut self, additional: usize)

🔬 This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl<K, V, S> Extend<(K, V)> for SparseSecondaryMap<K, V, S> where
    K: Key,
    S: BuildHasher, 

fn extend<I: IntoIterator<Item = (K, V)>>(&mut self, iter: I)

Extends a collection with the contents of an iterator.

pub fn extend_one(&mut self, item: A)

🔬 This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

pub fn extend_reserve(&mut self, additional: usize)

🔬 This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl<K, V, S> FromIterator<(K, V)> for SparseSecondaryMap<K, V, S> where
    K: Key,
    S: BuildHasher + Default, 

fn from_iter<I: IntoIterator<Item = (K, V)>>(iter: I) -> Self

Creates a value from an iterator.

impl<K, V, S> Index<K> for SparseSecondaryMap<K, V, S> where
    K: Key,
    S: BuildHasher, 

type Output = V

The returned type after indexing.

fn index(&self, key: K) -> &V

Performs the indexing (container[index]) operation.

impl<K, V, S> IndexMut<K> for SparseSecondaryMap<K, V, S> where
    K: Key,
    S: BuildHasher, 

fn index_mut(&mut self, key: K) -> &mut V

Performs the mutable indexing (container[index]) operation.

impl<'a, K, V, S> IntoIterator for &'a SparseSecondaryMap<K, V, S> where
    K: Key,
    S: BuildHasher, 

type Item = (K, &'a V)

The type of the elements being iterated over.

type IntoIter = Iter<'a, K, V>

Which kind of iterator are we turning this into?

fn into_iter(self) -> Self::IntoIter

Creates an iterator from a value.

impl<'a, K, V, S> IntoIterator for &'a mut SparseSecondaryMap<K, V, S> where
    K: Key,
    S: BuildHasher, 

type Item = (K, &'a mut V)

The type of the elements being iterated over.

type IntoIter = IterMut<'a, K, V>

Which kind of iterator are we turning this into?

fn into_iter(self) -> Self::IntoIter

Creates an iterator from a value.

impl<K, V, S> IntoIterator for SparseSecondaryMap<K, V, S> where
    K: Key,
    S: BuildHasher, 

type Item = (K, V)

The type of the elements being iterated over.

type IntoIter = IntoIter<K, V>

Which kind of iterator are we turning this into?

fn into_iter(self) -> Self::IntoIter

Creates an iterator from a value.

impl<K, V, S> PartialEq<SparseSecondaryMap<K, V, S>> for SparseSecondaryMap<K, V, S> where
    K: Key,
    V: PartialEq,
    S: BuildHasher, 

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

#[must_use]

pub fn ne(&self, other: &Rhs) -> bool

This method tests for !=.

impl<K, V, S> Eq for SparseSecondaryMap<K, V, S> where
    K: Key,
    V: Eq,
    S: BuildHasher,