Struct nalgebra::base::constraint::ShapeConstraint[−][src]

pub struct ShapeConstraint;

A type used in where clauses for enforcing constraints.

Trait Implementations

`impl<D: Dim> DimEq<D, D> for ShapeConstraint`[src]

`type Representative = D`

This is either equal to D1 or D2, always choosing the one (if any) which is a type-level constant. Read more

`impl<D: DimName> DimEq<D, Dynamic> for ShapeConstraint`[src]

`type Representative = D`

This is either equal to D1 or D2, always choosing the one (if any) which is a type-level constant. Read more

`impl<D: DimName> DimEq<Dynamic, D> for ShapeConstraint`[src]

`type Representative = D`

This is either equal to D1 or D2, always choosing the one (if any) which is a type-level constant. Read more

`impl<D: Dim> SameDimension<D, D> for ShapeConstraint`[src]

`type Representative = D`

This is either equal to D1 or D2, always choosing the one (if any) which is a type-level constant. Read more

`impl<D: DimName> SameDimension<D, Dynamic> for ShapeConstraint`[src]

`type Representative = D`

This is either equal to D1 or D2, always choosing the one (if any) which is a type-level constant. Read more

`impl<D: DimName> SameDimension<Dynamic, D> for ShapeConstraint`[src]

`type Representative = D`

This is either equal to D1 or D2, always choosing the one (if any) which is a type-level constant. Read more

`impl<D: Dim> SameNumberOfColumns<D, D> for ShapeConstraint`[src]

`type Representative = D`

This is either equal to D1 or D2, always choosing the one (if any) which is a type-level constant. Read more

`impl<D: DimName> SameNumberOfColumns<D, Dynamic> for ShapeConstraint`[src]

`type Representative = D`

This is either equal to D1 or D2, always choosing the one (if any) which is a type-level constant. Read more

`impl<D: DimName> SameNumberOfColumns<Dynamic, D> for ShapeConstraint`[src]

`type Representative = D`

This is either equal to D1 or D2, always choosing the one (if any) which is a type-level constant. Read more

`impl<D: Dim> SameNumberOfRows<D, D> for ShapeConstraint`[src]

`type Representative = D`

This is either equal to D1 or D2, always choosing the one (if any) which is a type-level constant. Read more

`impl<D: DimName> SameNumberOfRows<D, Dynamic> for ShapeConstraint`[src]

`type Representative = D`

This is either equal to D1 or D2, always choosing the one (if any) which is a type-level constant. Read more

`impl<D: DimName> SameNumberOfRows<Dynamic, D> for ShapeConstraint`[src]

`type Representative = D`

This is either equal to D1 or D2, always choosing the one (if any) which is a type-level constant. Read more

`impl<R1: Dim, C1: Dim, R2: Dim, C2: Dim> AreMultipliable<R1, C1, R2, C2> for ShapeConstraint where ShapeConstraint: DimEq<C1, R2>,` [src]

Auto Trait Implementations

`impl RefUnwindSafe for ShapeConstraint`

`impl Send for ShapeConstraint`

`impl Sync for ShapeConstraint`

`impl Unpin for ShapeConstraint`

`impl UnwindSafe for ShapeConstraint`

Blanket Implementations

`impl<T> Any for T where T: 'static + ?Sized,` [src]

`pub fn type_id(&self) -> TypeId`[src]

`impl<T> Borrow<T> for T where T: ?Sized,` [src]

`pub fn borrow(&self) -> &T`[src]

`impl<T> BorrowMut<T> for T where T: ?Sized,` [src]

`pub fn borrow_mut(&mut self) -> &mut T`[src]

`impl<T> From<T> for T`[src]

`pub fn from(t: T) -> T`[src]

`impl<T, U> Into for T where U: From<T>,` [src]

`pub fn into(self) -> U`[src]

`impl<T> Same<T> for T`[src]

`type Output = T`

Should always be Self

`impl<SS, SP> SupersetOf<SS> for SP where SS: SubsetOf<SP>,` [src]

`pub fn to_subset(&self) -> Option<SS>`[src]

`pub fn is_in_subset(&self) -> bool`[src]

`pub fn to_subset_unchecked(&self) -> SS`[src]

`pub fn from_subset(element: &SS) -> SP`[src]

`impl<T, U> TryFrom for T where U: Into<T>,` [src]

`type Error = Infallible`

The type returned in the event of a conversion error.

`pub fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>`[src]

`impl<T, U> TryInto for T where U: TryFrom<T>,` [src]

`type Error = >::Error`

The type returned in the event of a conversion error.

Struct nalgebra::base::constraint::ShapeConstraint⎘[−][src]

Trait Implementations

impl<D: Dim> DimEq<D, D> for ShapeConstraint[src]

type Representative = D

impl<D: DimName> DimEq<D, Dynamic> for ShapeConstraint[src]

type Representative = D

impl<D: DimName> DimEq<Dynamic, D> for ShapeConstraint[src]

type Representative = D

impl<D: Dim> SameDimension<D, D> for ShapeConstraint[src]

type Representative = D

impl<D: DimName> SameDimension<D, Dynamic> for ShapeConstraint[src]

type Representative = D

impl<D: DimName> SameDimension<Dynamic, D> for ShapeConstraint[src]

type Representative = D

impl<D: Dim> SameNumberOfColumns<D, D> for ShapeConstraint[src]

type Representative = D

impl<D: DimName> SameNumberOfColumns<D, Dynamic> for ShapeConstraint[src]

type Representative = D

impl<D: DimName> SameNumberOfColumns<Dynamic, D> for ShapeConstraint[src]

type Representative = D

impl<D: Dim> SameNumberOfRows<D, D> for ShapeConstraint[src]

type Representative = D

impl<D: DimName> SameNumberOfRows<D, Dynamic> for ShapeConstraint[src]

type Representative = D

impl<D: DimName> SameNumberOfRows<Dynamic, D> for ShapeConstraint[src]

type Representative = D

impl<R1: Dim, C1: Dim, R2: Dim, C2: Dim> AreMultipliable<R1, C1, R2, C2> for ShapeConstraint where ShapeConstraint: DimEq<C1, R2>, [src]

Auto Trait Implementations

impl RefUnwindSafe for ShapeConstraint

impl Send for ShapeConstraint

impl Sync for ShapeConstraint

impl Unpin for ShapeConstraint

impl UnwindSafe for ShapeConstraint

Blanket Implementations

impl<T> Any for T where T: 'static + ?Sized, [src]

pub fn type_id(&self) -> TypeId[src]

impl<T> Borrow<T> for T where T: ?Sized, [src]

pub fn borrow(&self) -> &T[src]

impl<T> BorrowMut<T> for T where T: ?Sized, [src]

pub fn borrow_mut(&mut self) -> &mut T[src]

impl<T> From<T> for T[src]

pub fn from(t: T) -> T[src]

impl<T, U> Into<U> for T where U: From<T>, [src]

pub fn into(self) -> U[src]

impl<T> Same<T> for T[src]

type Output = T

impl<SS, SP> SupersetOf<SS> for SP where SS: SubsetOf<SP>, [src]

pub fn to_subset(&self) -> Option<SS>[src]

pub fn is_in_subset(&self) -> bool[src]

pub fn to_subset_unchecked(&self) -> SS[src]

pub fn from_subset(element: &SS) -> SP[src]

impl<T, U> TryFrom<U> for T where U: Into<T>, [src]

type Error = Infallible

pub fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>[src]

impl<T, U> TryInto<U> for T where U: TryFrom<T>, [src]

type Error = <U as TryFrom<T>>::Error

pub fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>[src]

impl<V, T> VZip<V> for T where V: MultiLane<T>, [src]

pub fn vzip(self) -> V[src]

Struct nalgebra::base::constraint::ShapeConstraint[−][src]

`impl<D: Dim> DimEq<D, D> for ShapeConstraint`[src]

`type Representative = D`

`impl<D: DimName> DimEq<D, Dynamic> for ShapeConstraint`[src]

`type Representative = D`

`impl<D: DimName> DimEq<Dynamic, D> for ShapeConstraint`[src]

`type Representative = D`

`impl<D: Dim> SameDimension<D, D> for ShapeConstraint`[src]

`type Representative = D`

`impl<D: DimName> SameDimension<D, Dynamic> for ShapeConstraint`[src]

`type Representative = D`

`impl<D: DimName> SameDimension<Dynamic, D> for ShapeConstraint`[src]

`type Representative = D`

`impl<D: Dim> SameNumberOfColumns<D, D> for ShapeConstraint`[src]

`type Representative = D`

`impl<D: DimName> SameNumberOfColumns<D, Dynamic> for ShapeConstraint`[src]

`type Representative = D`

`impl<D: DimName> SameNumberOfColumns<Dynamic, D> for ShapeConstraint`[src]

`type Representative = D`

`impl<D: Dim> SameNumberOfRows<D, D> for ShapeConstraint`[src]

`type Representative = D`

`impl<D: DimName> SameNumberOfRows<D, Dynamic> for ShapeConstraint`[src]

`type Representative = D`

`impl<D: DimName> SameNumberOfRows<Dynamic, D> for ShapeConstraint`[src]

`type Representative = D`

`impl<R1: Dim, C1: Dim, R2: Dim, C2: Dim> AreMultipliable<R1, C1, R2, C2> for ShapeConstraint where ShapeConstraint: DimEq<C1, R2>,` [src]

`impl RefUnwindSafe for ShapeConstraint`

`impl Send for ShapeConstraint`

`impl Sync for ShapeConstraint`

`impl Unpin for ShapeConstraint`

`impl UnwindSafe for ShapeConstraint`

`impl<T> Any for T where T: 'static + ?Sized,` [src]

`pub fn type_id(&self) -> TypeId`[src]

`impl<T> Borrow<T> for T where T: ?Sized,` [src]

`pub fn borrow(&self) -> &T`[src]

`impl<T> BorrowMut<T> for T where T: ?Sized,` [src]

`pub fn borrow_mut(&mut self) -> &mut T`[src]

`impl<T> From<T> for T`[src]

`pub fn from(t: T) -> T`[src]

`impl<T, U> Into<U> for T where U: From<T>,` [src]

`pub fn into(self) -> U`[src]

`impl<T> Same<T> for T`[src]

`type Output = T`

`impl<SS, SP> SupersetOf<SS> for SP where SS: SubsetOf<SP>,` [src]

`pub fn to_subset(&self) -> Option<SS>`[src]

`pub fn is_in_subset(&self) -> bool`[src]

`pub fn to_subset_unchecked(&self) -> SS`[src]

`pub fn from_subset(element: &SS) -> SP`[src]

`impl<T, U> TryFrom<U> for T where U: Into<T>,` [src]

`type Error = Infallible`

`pub fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>`[src]

`impl<T, U> TryInto<U> for T where U: TryFrom<T>,` [src]

`type Error = <U as TryFrom<T>>::Error`

`pub fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>`[src]

`impl<V, T> VZip<V> for T where V: MultiLane<T>,` [src]

`pub fn vzip(self) -> V`[src]